Brother MFC-8420 User Manual page 369

26
Note that some telephones are not compatible with this unit and
dialling errors may result if the two devices are used together in
other than quiet conditions. The Telecom Faults Service is not
to be called should such problems arise. In such cases, it is
recommended that the prefix and wanted number are dialled
manually.
27
This equipment may not provide for the effective hand-over of a
call to another device connected to the same line.
28
Immediately disconnect this equipment should it become
physically damaged, and arrange for its disposal or repair.
29
Some parameters required for compliance with Telecom's
Telepermit requirements are dependent on the equipment (PC)
associated with this device. The associated equipment shall be
set to operate within the following limits for compliance with
Telecom's Specifications:-
There shall be no more than 10 call attempts to the same
number within any 30 minute period for any single manual call
initiation, and,
The equipment shall go on-hook for a period of not less than 30
seconds between the end of one attempt and the beginning of
the next attempt.
30
Some parameters required for compliance with Telecom's
Telepermit requirements are dependent on the equipment (PC)
associated with this device. In order to operate within the limits
for compliance with Telecom's Specifications, the associated
equipment shall be set to ensure that automatic calls to different
numbers are spaced such that there is no less that 5 seconds
between the end of one call attempt and the beginning of
another.
31
The call log incorporated in this equipment may not record all
answered calls. The call log, therefore may not agree with the
Telecom account.
32
When using the Caller Line Identification incorporated in this
device, verify the integrity of the recorded digits prior to dialling.
21 - 8 IMPORTANT INFORMATION