Scan To Image - Brother MFC-8420 User Manual

Scan to Image

When you select Scan to Image your document will be scanned and
sent directly to the PC you designated on your network. The Brother
SmartUI will activate the default graphics application on the
designated PC. You can change the
®
Windows 98/Me/2000: See Scan to Image on page 14-14.) (For
®
Windows XP: See Hardware Section: Changing the Scan to button
configuration on page 15-5 to 15-10.)
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the Scan button. You
will not be able to initiate a network scan from the Brother
Control Center (SmartUI).
1
Place the document face up in the ADF, or face down on the
scanner glass.
2
Press
3
Press
to Image .
Set
Press .
4
Press
destination you want to send.
Set
Press .
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Set
Press .
The MFC will start the scanning process.
Scan
( ).
or to select Scan
or to select a
Scan
configuration. (For
Scan to E-Mail
Scan to Image
Scan to OCR
Scan to File
Select
NETWORK SCANNING 19 - 8
& Set