Trip Computer - Trip Statistics - Volvo V40 Owner's Manual

03 Instruments and controls

Trip computer - trip statistics*

Information is stored about completed trips
containing average fuel consumption and
average speed, which can be viewed in the
centre console's screen as a bar chart.
Function
03
Trip statistics 32 .
Each bar symbolises 1 km or 10 km driven
distance, depending on the scale selected -
the bar at the far right shows the value for the
current kilometre or 10 km.
With the TUNE wheel, the scale of each block
can be switched between 1 km and 10 km -
the cursor at the far right shifts position
between up and down depending on the
scale selected.
The figure is schematic - layout may vary depending on updated software and market.
32
*
124
Option/accessory, for more information, see Introduction.
Operation
A setting can be defined in the MY CAR
menu system:
MY CAR My V40 Trip statistics:
•
Start new trip - ENTER is used to delete
all previous statistics, back out of the
menu by selecting EXIT.
•
Reset for every driving cycle
the box by selecting ENTER and go back
out of the menu by selecting EXIT.
Reset for every driving cycle
With the "
option highlighted, all statistics are deleted
automatically once driving is complete and
the car has been stationary for 4 hours. The
journey statistics start again from zero the
next time the engine is started.
If a new drive cycle begins before 4 hours
have passed, the current period has to be
deleted manually first using the "
trip
" option.
See also information on Eco guide (p. 64).
Related information
•
Trip computer - analogue combined
instrument panel (p. 115)
•
Trip computer - digital combined instru-
ment panel (p. 119)
•
Trip computer - functions (p. 123)
- highlight
"
Start new