Speed Limiter* - Changing Speed - Volvo V40 Owner's Manual

07 Driver support
||
Switch on and activate
When the speed limiter is active, its
symbol (6) is shown in combination with a
mark (5) by the set maximum speed in the
combined instrument panel.
Selection and storage of the highest possible
speed in the memory can be made both dur-
ing a journey and while stationary.
While driving
1. Press the steering wheel button
switch on the speed limiter.
> The symbol (6) for speed limiter illumi-
nates in the combined instrument
panel.
2. When the car is moving at the desired
highest possible speed: Press one of the
steering wheel buttons
combined instrument panel shows a
mark (5) next to the desired maximum
speed.
> The speed limiter is then active and the
selected max. speed is stored in the
memory.
When stationary
07
1. Press the steering wheel button
switch on the speed limiter.
*
192
Option/accessory, for more information, see Introduction.
2. Scroll with the
bined instrument panel shows a mark (5)
by the desired maximum speed.
> The speed limiter is then active and the
selected max. speed is stored in the
memory.
Related information
•
Speed limiter* (p. 191)
to
or until the
to

Speed limiter* - changing speed

button until the com-
A (Speed Limiter) can be regarded as a
reverse cruise control - the driver regulates
the speed using the accelerator pedal but is
prevented from accidentally exceeding a pre-
selected/set speed by the speed limiter.
To change the stored speed:
•
To adjust +/- 1 km/h:
•
Related information
•
Adjust with short presses on
the steering wheel keypad - every press
gives +/- 5 km/h. The last presses made
are stored in the memory.
Hold down the button and release it when
the combined instrument panel shows a
mark next to the desired maximum
speed.
Speed limiter* (p. 191)
or in