Blis - Operation - Volvo V40 Owner's Manual

07 Driver support
||
Overview
Position of the BLIS lamp
Indicator lamp
BLIS symbol
NOTE
The lamp illuminates on the side of the car
where the system has detected the vehi-
cle. If the car is overtaken on both sides at
the same time then both lamps illuminate.
07
NOTE: The illustration is schematic - details may vary depending on car model.
27
*
258
Option/accessory, for more information, see Introduction.
Maintenance
Sensor location.
27 .
The sensors for the BLIS functions are
located inside the rear wing/bumper on each
side of the car.
•
To ensure optimal functionality, the areas
in front of the sensors must be kept
clean.
Related information
•
BLIS - operation (p. 258)
•
CTA (Cross Traffic Alert)* (p. 260)

BLIS - operation

BLIS (Blind Spot Information System) is a
function designed for providing support for
the driver when driving in dense traffic on
roads with several lanes in the same direction.
Activate/deactivate BLIS
BLIS is activated when the engine is started.
This is confirmed by the indicator lamps in
the door panels flashing once.
Button for activating/deactivating.
The BLIS function can be deactivated/acti-
vated by pressing the BLIS button on the
centre console.
Some combinations of the selected equip-
ment leave no vacant space for a button in
the centre console - in which case the func-