Road Sign Information (Rsi)* - Limitations - Volvo V40 Owner's Manual

07 Driver support
||
Road sign information On/Off
The combined instrument panel's speed sym-
bol display can be disabled. To deactivate the
RSI function:
•
Uncheck the option
Information at Settings
Road Sign Information
out by pressing EXIT.
Speed warning
07
The driver can opt to receive a warning when
the applicable speed limit is exceeded by
*
190
Option/accessory, for more information, see Introduction.
5 km/h or more. This warning is given by the
symbol showing the applicable maximum
speed temporarily flashing when this speed is
exceeded.
To activate speed warning:
•
Check the option
Settings
and go back out by pressing EXIT.
Related information
•
Road Sign Information (RSI) (p. 188)
•

Road sign information (RSI)* - limitations

(p. 190)
•
MY CAR (p. 104)
Road Sign
Car settings
and go back
Speed alert
at
Car settings Speed alert
Road sign information (RSI)* -
limitations
The road sign information function (RSI –
Road Sign Information) helps the driver to
remember which road signs the car has
passed. The function has the following limita-
tions.
The RSI function's camera sensor has limita-
tions just like the human eye. Find out more
about this in the section on the camera sen-
sor limitations (p. 231).
Signs which indirectly provide information on
a prevailing speed limit, e.g. name signs for
towns/districts, are not recorded by the RSI
function.
Here are some other examples of what can
disrupt the function:
•
Faded signs
•
Signs positioned on bends
•
Rotated or damaged signs
•
Concealed or poorly positioned signs
•
Signs completely or partly covered with
frost, snow and/or dirt.
Related information
•
Road Sign Information (RSI) (p. 188)
•
Road sign information (RSI)* - operation
(p. 188)