Menu Navigation - Combined Instrument Panel - Volvo V40 Owner's Manual

Automobile
Hide thumbs Also See for V40:
Table of Contents

Advertisement

side of the mirror using a paper clip for exam-
ple.
The compass is deactivated when the heated
windscreen is activated. When the heated
windscreen is deactivated, the compass is
reactivated.
Calibration
The earth is divided into 15 magnetic zones.
The compass is set for the geographic area to
which the car was delivered. The compass
should be calibrated if the car is moved
across several magnetic zones. Proceed as
follows:
1. Stop the car in a large open area free
from steel structures and high-voltage
power lines.
2. Start the car.
NOTE
For the best calibration, switch off all elec-
trical equipment (climate control system,
wipers, etc.) and makes sure that all doors
are closed.
3. Hold the button on the underside of the
rearview mirror depressed
approx. 3 seconds. The number of the
current magnetic zone is shown.
Magnetic zones.
4. Press the button repeatedly until the
required magnetic zone (
1–15
See the map of magnetic zones for the
compass.
5. Wait until the display returns to showing
C
the character
, or hold the button on the
bottom of the rearview mirror depressed
for approx. 6 seconds (use e.g. a paper
C
clip) until the character
is shown.
6. Drive slowly in a circle at a speed of no
more than 10 km/h until a compass direc-
tion is shown in the display, indicating
that calibration is complete. Then drive a
further 2 circles to fine-tune calibration.
7. Repeat the above procedure as neces-
sary.
03 Instruments and controls
Menu navigation - combined
instrument panel
The menus shown on the information display
in the combined instrument panel (p. 60) are
controlled with the left-hand stalk switch.
Which menus are shown depends on the key
position (p. 71).
) is shown.
Information display (analogue combined instru-
ment panel) and menu navigation controls.
03
101

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents