3.4 Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your
system, including the parameters of the CPU temperature, motherboard
temperature and the critical voltage.
CpU Fan 1 Setting
This allows you to set the speed of CPU fan 1. The default value
is [Manual].
target Fan Speed
This allows you to set the speed of Target Fan. The default value
is [Full On].
REAR Fan 1 Setting
This allows you to set the speed of REAR Fan 1. The default val-
ue is [Full On].
FRNt Fan 1 Setting
This allows you to set the speed of FRNT Fan 1. The default value
is [Full On].
FRNt Fan 2 Setting
This allows you to set the speed of FRNT Fan 2. The default value
is [Full On].
FRNt Fan 3 Setting
This allows you to set the speed of FRNT Fan 3. The default value
is [Full On].
82