Mechanical Dimensions - Hitachi CDR-8130 Instruction Manual

Symptoms
The CD-ROM 1.You place the disc up-side
Drive does not down in the Disc Tray.
operate even when 2. The disc is dirty.
a disc is loaded. 3. The pick-up lens is
dirty.
4.The disc is scratched or
warped.
5.Cable connection is
incorrect.
The Disc Tray can The program is incorrect. It
not beopened. is locked by the program.
Communications There are devices with the
between the host same Device Configuration
computer and the jumper setting on the
devices on the interface cable.
interface cable can
not be done.

MECHANICAL DIMENSIONS

130.0
149.3 149
(A) (A)
(A) (A)
139.8+/- 0.5
139.8Å}0.5
146
Possible causes
1.Place the disc right side up in the
2.Clean the disc surface.
3.Clean up the pick-up lens.
4.Change the disc.
5.Turn off your SYSTEM and re-
Check the program. Check the
program.
Give each device a different Device
Configuration Jumper setting.
12-M3
(Depth
: Max. 5)
(A) (A)
(A : Hole)
(A)(A)
10+/- 0.5
10Å}0.5
21.8Å}0.5
21.8+/- 0.5
41.3
11
Remedy
Disc Tray, then load it.
(See page 4)
10)
connect cables correctly.
(A) Hole
5 (max) Surface of
the CD-ROM DRIVE
Mounting Screw
Mounting frame of
the host computer
Dimensions (unit : mm)
(See page
M3X0.5