CONTROLS AND FUNCTIONS
(1) LOADING/UNLOADING/BUSY Indicator
Indicator blinks green only when the Disc Tray is being opened or
closed, or when the CD-ROM drive is accessing data.
(2) Disc Tray
When the power of the CD-ROM Drive is turned off, the Disc Tray can
not be opened and closed.
(3) Headphone Jack (3.5 mm)
(4) Headphone Volume Control
Adjust the headphone volume.
(5) OPEN/CLOSE Button
Press this button to open or close the Disc Tray.
(6) Manual Emergency Eject Hole
Only in case of emergency:
If the Disc Tray does not open when the OPEN/CLOSE Button is
pressed, the CD-ROM Drive's Manual Emergency Eject mechanism may
This should be used only in case of emergency.
See Page 9 about Manual Emergency Eject Procedure.
(7) Audio Output Terminal
(8) Device Configuration Jumper
This Connector is used to set operation modes such as Master,
Slave and CSEL