Sharp R-8320E Service Manual page 140

FIXING PROCEDURE OF CORD ANCHORAGE
As for the above subject, sometime it may cause to have wrong fixing about two pieces of cord anchorage
General :
unit. But this cord anchorage is an important part for the safety, therefore it must be fixed correctly and
firmly.
1. The cord anchorage which is used to secure the mains supply cord can be fixed in two different ways.
Content:
2. If you fix them as shown in Figure 2, the mains supply cord will not be secured firmly.
3. Therefore, make sure to fix them as shown in figure 1.
MAINS
SUPPLY
CORD
Figure 1. Correct Fixing
I
5mm
CORD ANCHORAGE
139
Figure 2. Wrong Fixing
3mm