Davis Instruments Vantage Pro2 Console Manual page 26

07395.234 Manual VP2 console Book.book Page 23 Wednesday, November 17, 2004 3:57 PM
Selecting Units of Measure
sors readings display depends on your station configuration.
Temperatures for temperature stations display, with soil temperature and
moisture stations displaying consecutively.
WIND
NW
W
SW
Last 24 hrs
Vertical Scale:
Humidity
Press HUM to select outside humidity. Pressing HUM a second
time selects inside humidity. Humidity is displayed in percent
relative humidity.
Each consecutive press of HUM displays humidity readings for any
optional humidity, leaf wetness, and leaf temperature stations also con-
nected to your console. The order the optional sensors readings display
depends on your station configuration. Humidity readings for humidity sta-
tions display, with leaf wetness and leaf temperature readings displaying
consecutively.
Wind Chill
Press 2ND then press CHILL to select Wind Chill.
Wind Chill is displayed in either Fahrenheit (ºF) or Cen-
tigrade (ºC) in whole degrees.
The console uses the ten-minute average wind speed to calculate wind
chill.
Dew Point
Press 2ND then press DEW to select Dew Point. Dew
Point is displayed in either Fahrenheit (ºF) or Centi-
grade (ºC) in whole degrees.
Barometric Pressure
Press BAR to select barometric pressure. Barometric pressure
may be displayed in inches (in), millimeters (mm), millibars
(mb) or hectoPascals (hPa).
23
HUM IN
HUM OUT
N
pm
NE
TEMP OUT HUM OUT BAROMETER
F
E
hPa
MPH
HUM IN
TEMP IN
SE
F F
S
HEAT INDEX
Every 1 hr
RAIN YEAR
DAILY RAIN
in in
STATION NO.1
X10
Humidity, Pressure, Dew Point & Wind Chill
BAROMETER
hPa
DEW POINT
F
CHILL
F
DEW
HUM
CHILL
2 ND
WIND
DEW
2
ND
HUM
BAR