Dell PowerEdge M820 Systems Owner's Manual page 94

Error Code Message Information
Action
CPU0203
Message
LCD Message
Details
Action
CPU0204
Message
LCD Message
Details
Action
CPU0700
Message
LCD Message
Details
Action
94
damage to the processor or other electronic components in side the
system.
1. Turn system off and remove input power for one minute.
2. Reapply input power and turn system on.
3. Ensure the processor is seated correctly.
4. If the issue persists, see
number > < name > voltage is greater than the upper critical
CPU <
threshold.
number > < name > voltage is outside of range. Re-seat CPU.
CPU <
High voltages may be the result of problem with the voltage regulator
or a problem with the processor. Elevated voltages may result in
damage to the processor or other system electrical components. The
system may power down.
1. Turn system off and remove input power for one minute.
2. Reapply input power and turn system on.
3. Ensure the processor is seated correctly.
4. If the issue persists, see
number > < name > voltage is outside of range.
CPU <
number > < name > voltage is outside of range. Re-seat CPU.
CPU <
Voltages outside the allowable range may damage electrical
components or may cause the system to shutdown.
1. Turn system off and remove input power for one minute.
2. Ensure the processor is seated correctly.
3. Reapply input power and turn system on.
4. If the issue persists, see
number > initialization error detected.
CPU <
number > initialization error detected. Power cycle system.
CPU <
System BIOS was unable to initialize the processor.
1. Turn system off and remove input power for one minute.
2. Ensure the processor is seated correctly.
3. Reapply input power and turn system on.
Getting Help.
Getting Help.
Getting Help.