Addonics Technologies HDMU3 User Manual

Mini hdd duplicator station

Download this manual

T E C H N O L O G I E S

User Guide

Mini HDD Duplicator Station

(HDMU3, HDMU3-X)

www.addonics.com

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

Page 1 T E C H N O L O G I E S User Guide Mini HDD Duplicator Station (HDMU3, HDMU3-X) www.addonics.com Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at:...
Page 2: Power Cable
Unpacking and Overview Disk 1 Disk 2 Drive Slot Drive Slot Clone Button Back-up button Eject Buttons Progress LEDs Disk 1 LED Disk 2 LED Power LED USB 3.0 Power Connector Switch Power Supply Connector Power Cable USB 3.0 Cable Drive slots: Insert hard drive with SATA connector facing down and on the left side.
Page 3 Clone Button: Press and hold for three seconds to start copying from Disk1 to Disk2, when no USB host is connected. Backup Button: Press to launch the HDMU3 backup utility. Disk Cloning 1. Be sure to insert the SOURCE drive into the Disk1 slot and the TARGET drive into the Disk2 slot.
Page 4 CONTACT US www.addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www.addonics.com/sales/query/...

Hdmu3-x