Recalling The Average Reading; Recalling The Memory Data; Deleting All Data Stored In Memory - A&D UB-351 Instruction Manual

Recalling the Average Reading

The UB-351 provides an average blood pressure reading based on
the total measurements stored in memory. Press the
button to see the average blood pressure reading. The average blood
pressure reading and the number of measurements stored in memory
will appear.
The UB-351 automatically stores up to 90 blood pressure and pulse measurements in memory. Measurements stored
in memory are assigned an index number in the order of the newest to the oldest. The oldest reading displays as "n01".
To retrieve readings, follow these simple steps:
1. When the display screen is blank, press the
reading displayed.
Press the button again. You will see the index number of the most recent reading followed by the
MEMORY
measurement data.
2. If you want to retrieve other measurements in memory, press and release the
repeatedly until the desired index number is reached (e.g. n14). The measurement will then be displayed.
Notes: The device will turn off automatically after the index number and results are displayed twice.
If there are no measurements stored in memory, the display indicates dashes as
shown to the right.

Deleting all Data Stored in Memory

To delete all data stored in memory, remove the batteries from the battery compartment.

Recalling the Memory Data

MEMORY
English 12
("M")
MEMORY
button. You will see the average blood pressure
Average
Number of
measurements
stored in memory
button
MEMORY