3.55.8. HWMSettings
ReassDoneLinger
ReassIllegalLinger
3.55.8. HWMSettings
Description
General settings for Hardware Monitoring
Properties
EnableSensors
SensorPollInterval
MemoryPollInterval
MemoryUsePercent
MemoryLogRepetition
MemoryAlertLevel
MemoryCriticalLevel
MemoryWarningLevel
3.55.9. ICMPSettings
Description
Settings related to the ICMP protocol.
Properties
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Enable/disable all HWM functionality. (Default: No)
Sensor polling interval. (Default: 500)
Memory polling interval in minutes. (Default: 15)
Should mem monitor use percentage as unit for monitoring, else it
is megabyte. (Default: Yes)
Should we send a log message for each poll result that is in the
Alert, Critical or Warning level, or should we only send when a
new level is reached. (Default: No)
Alert log message if free memory is below this value, disable by us-
ing 0. (Default: 0)
Critical log message if free memory is below this value, disable by
using 0. (Default: 0)
Warning log message if free memory is below this value, disable by
using 0. (Default: 0)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
How long to remember a completed reassembly (watching for
old dups). (Default: 20)
How long to remember an illegal reassembly (watching for
more fragments). (Default: 60)
191
Chapter 3. Configuration Reference