Natpool - D-Link NetDefend DFL-210 Cli Reference Manual

3.39. NATPool

3.39. NATPool
Description
A NAT Pool is used for NATing multiple concurrent connections to using different source IP ad-
dresses.
Properties
Name
Type
IPSource
IPPool
IPPoolIPs
IPRange
StateKeepAlive
MaxStates
ProxyARPAllInterfaces
ProxyARPInterfaces
Comments
Specifies a symbolic name for the NAT Pool. (Identifier)
Specifies how NAT'ed connections are assigned a NAT IP ad-
dress. (Default: stateful)
Specify which IP Address source to use. (Default: IPRange)
Specifies the IP Pool used for retrieving IP addresses for NAT
translation.
The number of IP addresses to get from the IP Pool.
Specifies the range of IP addresses used for NAT translation.
The number of seconds that stateful NAT state will be kept in
absence of new connections. (Default: 120)
Maximum number of statefully tracked NATPool states.
(Default: 16384)
Always select all interfaces, including new ones, for publishing
routes needed for receiving traffic on NATPool addresses.
(Default: No)
Specifies the interface/interfaces on which the security gateway
should publish routes needed for the relay via Proxy ARP.
(Optional)
Text describing the current object. (Optional)
158
Chapter 3. Configuration Reference