D-Link NetDefend DFL-210 Cli Reference Manual page 185

3.54.4. ServiceTCPUDP
Properties
Name
DestinationPorts
Type
SourcePorts
SYNRelay
PassICMPReturn
ALG
MaxSessions
Comments
Specifies a symbolic name for the service. (Identifier)
Specifies the destination port or the port ranges applicable to this ser-
vice.
Specifies whether this service uses the TCP or UDP protocol or both.
(Default: TCP)
Specifies the source port or the port ranges applicable to this service.
(Default: 0-65535)
Enable SYN flood protection (SYN Relay). (Default: No)
Enable passing an ICMP error message only if it is related to an existing
connection using this service. (Default: No)
An Application Layer Gateway (ALG), capable of managing advanced
protocols, can be specified for this service. (Optional)
Specifies how many concurrent sessions that are permitted using this
service. (Default: 200)
Text describing the current object. (Optional)
185
Chapter 3. Configuration Reference