D-Link NetDefend DFL-210 Cli Reference Manual page 57

2.2.49. ospf
ospf -iface [<interface>] [-process=<OSPF Router Process>]
Show interface information.
ospf -area [<OSPF Area>] [-process=<OSPF Router Process>]
Show area information.
ospf -neighbor [<OSPF Neighbor>] [-process=<OSPF Router Process>]
Show neighbor information.
ospf -route [{HA | ALT}] [-process=<OSPF Router Process>]
Show the internal OSPF process routingtable.
ospf -database [-verbose] [-process=<OSPF Router Process>]
Show the LSA database.
ospf -lsa <lsaID> [-process=<OSPF Router Process>]
Show details for a specified LSA.
ospf -snoop={ON | OFF} [-process=<OSPF Router Process>]
Show troubleshooting messages on the console.
ospf -ifacedown <interface> [-process=<OSPF Router Process>]
Take specified interface offline.
ospf -ifaceup <interface> [-process=<OSPF Router Process>]
Take specified interface online.
ospf -execute={STOP | START | RESTART}
[-process=<OSPF Router Process>]
Start/stop/restart OSPF process.
Options
-area
-database
-execute={STOP | START | RE-
START}
-iface
-ifacedown
-ifaceup
-lsa
-neighbor
Show area information.
Show the LSA database.
Start/stop/restart OSPF process. (Admin only)
Show interface information.
Take specified interface offline. (Admin only)
Take specified interface online. (Admin only)
Show details for a specified LSA <lsaID>.
Show neighbor information.
57
Chapter 2. Command Reference