Dhcprelay - D-Link NetDefend DFL-210 Cli Reference Manual

3.14. DHCPRelay

3.14. DHCPRelay
Description
Use a DHCP Relay to dynamically alter the routing table according to relayed DHCP leases.
Properties
Name
Action
SourceInterface
TargetDHCPServer
IPOfferFilter
AddRoute
AddRouteLocalIP
AddRouteGatewayIP
RoutingTable
MaxRelaysPerInterface
AgentIP
AllowNULLOffers
ProxyARPAllInterfaces
ProxyARPInterfaces
LogEnabled
LogSeverity
Comments
Specifies a symbolic name for the relay rule. (Identifier)
Ignore, Relay or BootpFwd. (Default: Ignore)
The source interface of the DHCP packet.
Specifies the IP of the server to send the relayed DHCP packets
to.
Specifies the span of IP addresses that are allowed to be relayed
from the DHCP server. (Default: 1)
Enable dynamic adding of routes as leases are added and re-
moved. (Default: No)
The IP Address specified here will automatically be published
on the interfaces where a route is added. (Optional)
The IP used as gateway to reach hosts on this route. (Optional)
Specifies the routing table the clients host route should be added
to. (Default: main)
Specifies how many relays are allowed per interface, that means,
how many DHCP clients are allowed to be relayed through each
interface. (Optional)
Define what IP the relay should use as gateway IP when passing
the requests to the DHCP server. (Default: Recv)
Accept server responses offering IP address "0.0.0.0" (no IP ad-
dress offered). (Default: No)
Always select all interfaces, including new ones, for publishing
routes needed for the relay via Proxy ARP. (Default: No)
Specifies the interface/interfaces on which the security gateway
should publish routes needed for the relay via Proxy ARP.
(Optional)
Enable logging. (Default: Yes)
Specifies with what severity log events will be sent to the spe-
cified log receivers. (Default: Default)
Text describing the current object. (Optional)
109
Chapter 3. Configuration Reference