Configmodepool - D-Link NetDefend DFL-210 Cli Reference Manual

3.11. ConfigModePool

3.11. ConfigModePool
Description
An IKE Config Mode Pool will dynamically assign the IP address, DNS server, WINS server etc. to
the VPN client connecting to this gateway.
Properties
IPPoolType
IPPool
IPPoolAddress
IPPoolNetmask
DNS
NBNSIP
DHCP
Subnets
Comments
Specifies whether a predefined IP Pool or a static set of IP addresses should
be used as IP address source.
Specifies the IP pool to use for assigning IP addresses to VPN clients.
Specifies the set of IP addresses to use for assigning IP addresses to VPN
clients.
Specifies the netmask to assign to VPN clients.
Specifies the IP address of a DNS server that a VPN client should be able to
connect to. (Optional)
Specifies the IP address of a NBNS/WINS server that a VPN client should
be able to connect to. (Optional)
Specifies the IP address of a DHCP that that a VPN client should be able to
connect to. (Optional)
Specifies additional subnets behind this gateway. (Optional)
Text describing the current object. (Optional)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3. Configuration Reference
106