Logreceivermemory; Logreceiversmtp - D-Link NetDefend DFL-210 Cli Reference Manual

3.38.3. LogReceiverSMTP

3.38.2. LogReceiverMemory

Description
A memory log receiver is used to receive and keep log events in system RAM.
Properties
Name
LogSeverity
Comments
3.38.2.1. LogReceiverMessageException
The definitions here are the same as in Section 3.38.1.1, "LogReceiverMessageException" .
3.38.3. LogReceiverSMTP
Description
An SMTP event receiver is used for receiving emails for IDP events.
Properties
Name
IPAddress
Port
Receiver1
Receiver2
Receiver3
Sender
Identity
XMailer
Subject
HoldTime
MinRepeatDelay
LogThreshold
Specifies a symbolic name for the log receiver. (Identifier)
Specifies with what severity log events will be sent to the specified log receiv-
ers. (Optional; Default: Emergency,Alert,Critical,Error,Warning,Notice,Info)
Text describing the current object. (Optional)
Specifies a symbolic name for the log receiver. (Identifier)
The IP address of the SMTP server.
Specifies the which port to use to connect to the SMTP server. (Default:
25)
The email address that the event information is sent to.
Alternate email receiver. (Optional)
Alternate email receiver. (Optional)
Specifies which sender the email will have. (Default: hostmaster)
Specifies which identity to write in the email header. (Default: hostmaster)
Specifies the X-mailer information to write in the email header. (Optional)
TODO.
The hold time in seconds during which the log threshold must be reached
for an email to be sent. (Default: 120)
The amount of seconds the security gateway will wait before sending an-
other email. (Default: 600)
The number of events that have to occur within the hold time for an email
to be sent. (Default: 2)
156
Chapter 3. Configuration Reference