IMPORTANT:
Always disconnect the power cord from AC outlet before replacing parts or modules.
1.1.3
To prevent electrical shock, use only a properly grounded 3 prong outlet or extension
cord.
1.1.4
When replacement
parts are required, be sure to use replacement
parts specified by the
manufacturer
or have the same characteristics
as the original part. Unauthorized
substitutions
may result in fire, electric shock, or other hazards and will void the
manufacturer's
warranty.
1.1.5
Safety regulations
require that after a repair the set must be returned in its original
condition. In addition, prior to closing set, check that:
-Note:
>All wire harnesses and flex cables are properly routed and secured with factory tape
and/or mounted cable clamps.
> All cables and connectors are properly insulated and do not have any bare wires/lead
exposed.
-5-