Jaton Video-338PCI series User Manual page 21

You have now completed the installation of your new graphics adapter on your
system.
Upgrade Steps:
Add or change your video adapter to an existing system, you
may precede a few steps before you install the new hardware
and software (video display driver). The followings are some of
the considerations:
1. To add a new adapter, ensure the mainboard has available
IRQ for new devices, and there is no conflict between each
other.
2. If you are installing the video card into a system that has a
previous version of NVIDIA Display Driver. It is highly
recommended to remove the previous driver before installing
a new version. To remove previous driver safely with new
video card installed please do the following: 1) Press F8
during Windows boot to select and enter SAFE mode. 2)
Enter Control Panel and click on "Add Remove Programs" 3)
Uninstall previous versions of NVIDIA Video Display Driver.
3. If you try adding this video adapter to an ALL-IN-ONE
mainboard (which video port built-in already), then you have
to disable that port first. Otherwise, that will be a problem for
the new video adapter setup.
4. The driver installation for system upgrade is the same as
below, if error occurs when you proceed to step 1, 2 or 3,
please consult with your system dealer or the existing
hardware manufacturer support.
21