Table of Contents
Advertisement
3.Switching on/off
1)Connect the TV to power outlet. If the power indicator is red, it means the TV is off now. You need topress
the POWER button on the TV or the POWER button on the remote control to turn on the TV, and the power
indicator will light up in blue.
2)Press the power switch or the POWER button on the remote control again to turn off the TV.
4.Signal source selection
Press the number [1-9] button or CH+ or CH- button to select TV input; press the SOURCE button to select TV,
Video, S-Video, VGA or Component.
5.Air/Cable selection
In order to access this setting, you need to be in the Antenna (TV) source mode
(press SOURCE button repeatedly).
You can select the signal receiving method according to the following steps:
1) Press the MENU button to enter the main menu.
[
or
]
2) Press the
button to select the item Search and press the
[
]
button to enter Search menu.
[
or
]
3) Press the
button to select the item Tuning Mode.
[
]
4) Press the
button to change the item among Air,Cable .
5)Press OK button to confirm your selection. Press OK again to exit from the menu.
6.Channel search
In order to access this setting, you need to be in the Antenna (TV) source mode (press SOURCE button repeatedly).
1) Press the MENU button to enter the main menu.
2) Press the
[
or
]
button to select the item Search, and press the
[
]
button to enter Search menu.
[
or
]
3) Press the
button to select the item Auto Search.
[
]
4) Press the
button to start auto searching for all available channels.
5)Once all the available channels have been memorized, you are now able to use the numerical buttons
or channel + / - buttons to watch the channel number you desire.
7.Picture adjustment
1) Press the MENU button to enter the main menu.
[
or
]
2) Press the
button to select the item Picture Parameters,
[
]
and press the
button to enter Picture Parameters menu.
3) Press the
[
or
]
button to select the item you want to adjust.
4) Press the
button to adjust the level.
[
or
]
5)Press OK button to confirm your selection. Press OK again to exit from the menu.
8.Audio adjustment
1) Press the MENU button to enter the main menu.
[
or
]
2) Press the
button to select the item Audio Settings,
[
]
and press the
button to enterAudio Settings menu.
[
or
]
3) Press the
button to select the item you want to adjust.
[
or
]
4) Press the
button to adjust the level.
5)Press OK button to confirm your selection. Press OK again to exit from the menu.
Note1: All buttons mentioned above are on the remote control unless indicated otherwise.
Note2: For more detailed information, please refer to the pages that follow.
-5-
Equalier
Picture Parameters
Britghtness
50
Contrast
50
Saturation
50
Sharpness
50
Color Temp
Normal
Hue
50
quAlier
Audio Settings
Treble
50
Bass
50
Balance
50
HeadPhone
Equalier
Hide quick links:
Advertisement
Table of Contents
