Signal Source Selection; Channel Search - Hisense TL 2020 User Manual

3.Switching on/off
1) Connect the TV to power outlet. Switch on the power switch located on the back of the TV (See page 6,
item 21 for location), if the power indicator is red, it means the TV is off now. You need to press the
POWER switch on the TV or the POWER button on the remote control to turn on the TV, and the power
indicator will light up in blue.
2) Press the power switch or the POWER button on the remote control again to turn off the TV.

4.Signal source selection

Press the number [1-9] button or CH+ or CH- button to select TV input; press the SOURCE button to select TV,
Video, S-Video,VGA,Component.
5.Air/Cable selection
In order to access this setting, you need to be in the Antenna (TV) source mode (press SOURCE button repeatedly).
You can select the signal receiving method according to the following steps:
1) Press the MENU button to enter the main menu.
button to select the item Search and press the
[ or ]
2) Press the
button to enter Search menu.
[ ]
button to select the item Tuning Mode.
[ or ]
3) Press the
button to change the item among Air, Cable .
[ ]
4) Press the
5) Press OK button to confirm your selection. Press OK again to exit from the menu.

6.Channel search

In order to access this setting, you need to be in the Antenna (TV) source mode
(press SOURCE button repeatedly).
1) Press the MENU button to enter the main menu.
[ or
2) Press the
[ or
3) Press the
[ ]
4) Press the button to start auto searching for all available channels.
5)Once all the available channels have been memorized, you are now able to use the numerical buttons
or channel + / - buttons to watch the channel number you desire.
7.Picture adjustment
1) Press the MENU button to enter the main menu.
[ or
2) Press the
[
and press the
[ or
3) Press the
[ or
4) Press the
5) Press OK button to confirm your selection. Press OK again to exit from the menu.
8.Audio adjustment
1) Press the MENU button to enter the main menu.
[ or
2) Press the
[
and press the
[ or
3) Press the
[ or
4) Press the
5) Press OK button to confirm your selection. Press OK again to exit from the menu.
Note 1: All buttons mentioned above are on the remote control unless indicated otherwise.
Note 2: For more detailed information, please refer to the pages that follow.
button to select the item Search, and press the
]
button to select the item Auto Search.
]
button to select the item Picture Parameters,
]
button to enter Picture Parameters menu.
]
]
button to select the item you want to adjust.
]
button to adjust the level.
] button to select the item Audio Settings,
button to enter Audio Settings menu.
]
]
button to select the item you want to adjust.
]
button to adjust the level.
button to enter Search menu.
[ ]
-5-
Picture Parameters
Equalier
Britghtness
50
Contrast 50
Saturation 50
Sharpness 50
Color Temp
Normal
Hue
50
Audio Settings
quAlier
Treble
50
Bass 50
Balance 50
HeadPhone
Equalizer