Removing The Oven Door - Whirlpool RBD277PDB4 Use And Care Manual

PART
Oven door glass
WHAT TO USE
Paper towel and spray
glass cleaner
OR
Warm, soapy water and
a nonabrasive, plastic
scrubbing pad
Oven cavity Self-Cleaning cycle • See "Using the Self-Cleaning Cycle" on
pages 36-41.
HOW TO CLEAN
• Make sure oven is cool.
• Follow directions provided with the
cleaner.
• Wash, wipe with clean water, and dry
thoroughly.
Removing the oven door
For normal use of your oven, you do not
need to remove the door. However, you can
remove the door by following the instructions
in this section.
The oven door is heavy. Use both hands
to remove and replace the door. Do not lift
and carry the door by the handle. To remove
and replace the door you may need help.
To remove:
1. Open door all the way.
NOTE: Two %2" Allen wrenches or two nails
of similar diameter may be used if factory
furnished door removal pins have been
misplaced. Be careful not to damage
porcelain finish.
3. Grasp under handle and gently close
door as far as it will shut. Pull door out
at bottom to remove.
4. Set door aside on protected surface.
Insert small end
of pin here
2. Insert small end of a door removal pin
into each door hinge.
43