Configuration Example - High End Systems AXON User Manual

Configuration Example

Before programming a Digital Light fixture or the Axon media server from a DMX512 console,
you need to:
• Identify the DMX Source for the fixture
• Select the Protocol type to determine the DMX channel range this fixture will utilize
• Select a Fixture Number to identify this Axon on the Ethernet link (required if you will be
synchronizing output between fixtures).
• Assign a valid Start Channel (the first channel in the unique range of DMX channels
designated by the console for this Axon)
All these selections can be made in the Server tab for DL.3, DL.2 and Axon media servers.
1. To view configuration information for a individual server, click on All Servers in the left
pane of the CMA window and select the + to view all the servers on the fixture network.
Select a server in the left pane to view its configuration information in the right pane.
Axon Media Server User Manual
Content Management Application (CMA)
CHAPTER 15
189