Chroma Shift; Curved Surface Support - High End Systems AXON User Manual

CHAPTER 13
Effect Mode Options Descriptions

Chroma Shift

Visual Mode parameter DMX value = 21
This option shifts the red, blue, and green component colors in an image. You can offset color
components vertically and or horizontally.
Modifier 1: The default DMX value of 128 (50%) = no adjustment. Values below the midpoint
shift the color components right to a maximum at a value of 0. Values above the midpoint shift
the color components left to a maximum at a value of 255 (100%).
Modifier 2: The default DMX value of 128 (50%) = no adjustment. Values below the midpoint
shift the color components down to a maximum at a value of 0. Values above the midpoint shift
the color components up to a maximum at a value of 255 (100%).
Modifier 3: Not Used
NOTE: This option is also available as a Visual Mode adjusted with 2 Modifier
parameters, (see Chroma Shift on page 63).

Curved Surface Support

Effect Mode parameter DMX value = 135-140
Curved Surface Support corrects for shape distortions that occur when you project onto
surfaces that aren't flat. This Global effect option facilitates projecting onto convex or concave
cylinders, angular screens, spheres, and disk shaped surfaces.
You can apply this correction to any media server output including multi-fixture image
panoramas created with the Collage Generator Global Effect option, (see Global Functions:
Collage Generator™ Effect on page 103).
134
Object Effect Global Effect
Object Effect Global Effect
Axon Media Server User Manual