Downward Vertical Streaks - High End Systems AXON User Manual

CHAPTER 13
Effect Mode Options Descriptions

Downward Vertical Streaks

Effect Mode parameter DMX value = 80
This option lets you convert a portion of the image into vertical streaks. You can also rotate the
angle of the streak and fade from the original image to the image with the streak option
applied.
Modifier 1: At a DMX value of 0, there is no effect. Increasing the DMX value sets the
length of the streak portion of the image from the bottom up to 255 (100%) = to the full
image converted to streaks.
Modifier 2: The default DMX value of 128 (50%) = no adjustment. Values below the midpoint
move the edge of the streaked portion of the image clockwise as you approach 0 = 90°. Values
above the midpoint move the edge of the streaked portion of the image counterclockwise as you
approach 90° at a value of 255 (100%).
Modifier 3: When Modifier 1 has a DMX value > 0, Modifier 3 lets you fade from the original
image at a DMX value = 0 to the converted image at a DMX value of 255 (100%).
Original Graphic Object media file content
136
Object Effect
Original Graphic Object media file content
Modifier 1 = 170, Modifier 2 = 158,
Modifier 3 = 255
Axon Media Server User Manual
Global Effect