Strobe - High End Systems StudioPix Pixelation Luminaire User Manual

Strobe

Image Effect Function parameter DMX value = 1
Applies a strobe to Image A or Image B by turning layer intensity on and off. Use this effect to
create a flashing image.
Modifier 1: Operates the same as the Global Strobe parameter on an individual image.
DMX Value
Modifier 2: Not Used
Tip: You can use this image effect with the transparency parameter to "strobe" the non-
transparent portion of an image.
StudioPix™ Pixelation Luminaire User Manual
0–23
No strobe (open)
24–53
Periodic strobe slow to fast
54–83 Random random strobe slow to fast
84–113
Synchronous random strobe slow to fast
114–255
No strobe (open)
Image Effect
Effect Function Option
CHAPTER 10
Effect Descriptions
Global Effect
73