Table of Contents
Advertisement
Information Menu (INFO)
The Information menu allows you to view current fixture information such as internal
temperature, fixture hours, software version, and DMX data for any other device on the link.
Viewing the Current Software Version (VER)
To view the current software version:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the INFO menu. Press <Enter> to select.
3. Scroll to the VER option.
4. Press <Enter>. The LED will display the fixture's current software version.
Viewing the Electronic Housing Temperature (BASE)
This menu option allows you to view the current ambient temperature at the logic board inside
the fixture. To view the electronic housing temperature:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the INFO menu. Press <Enter> to select.
3. Scroll to the TEMP menu. Press <Enter> to select.
4. Scroll to the BASE option.
5. Press <Enter>. The LED will display the current internal temperature of the fixture's logic
board in degrees centigrade.
Viewing the Current Fixture Head Temperature (HEAD)
This menu option lets you view the current ambient temperature inside the fixture head. To
view the head temperature:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the INFO menu. Press <Enter> to select.
3. Scroll to the TEMP menu. Press <Enter> to select.
4. Scroll to the HEAD option.
5. Press <Enter>. The LED will display the current internal temperature of the fixture's logic
board in degrees centigrade.
Viewing the Current Fixture Hours (F/HR)
To view the number of hours the fixture has been on since this option was reset:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the INFO menu. Press <Enter> to select.
3. Scroll to the F/HR option.
4. Press <Enter>. The LED will display the number of hours the fixture has been on.
StudioPix™ Pixelation Luminaire User Manual
CHAPTER 3
The Menu System
21
Advertisement
Table of Contents
