Playback Mode; Playback Speed - High End Systems StudioPix Pixelation Luminaire User Manual

CHAPTER 9
Image Graphics Control
5. Playback the setup cue from step one and then manually run the fader from steps 2 and 3.
As you move the fader you should see the lips open and close. Defining Playback
After selecting a media file, you can choose from several Playback Modes and assign a Playback
Speed.

Playback Mode

A Playback Mode parameter for each image layer allows several playback options.
Default DMX Value: 0 = Plays forward in a continuous loop
DMX
Playback Mode
Value
0
Loop Forward
1
Loop Reverse
2
Once Forward
3 Once Reverse
4
Random
5
Bounce
6 Static Frame
7
Loop Forward w/ intensity >0
8
Loop Reverse w/ intensity >0
9
Once Forward w/ intensity >0
10
Once Reverse w/ intensity >0
11
Random w/ intensity >0
12 Bounce w/ intensity >0

Playback Speed

The Playback Speed parameter controls the speed of the selected media file's Playback Mode.
Default DMX Value: 128 = Playback at normal speed.
A DMX value of 0 or 128 (50%) plays back media files at the original recorded speed. DMX
values from 1 to 127 plays the media file back at an increasing speed, from slowest to the
original recorded speed. Values from 129-255 set playback speed from faster than normal to
fastest speed.
60
Plays the media file forward, looping continuously.
Plays the media file in reverse, looping continuously.
Plays the media file forward and holds on the last frame
Plays the media file forward and holds on the first frame
Plays the frames of the file in a random order.
Plays the media file forward then reverse, looping continuously.
Displays the frame that has been defined by the Frame parameter,
(see Frame on page 59)
Plays the media file forward, looping continuously.Plays only when
the Dim parameter value is greater than zero.
Plays the media file in reverse, looping continuously.Plays only
when the Dim parameter value is greater than zero.
Plays the media segment forward and holds on the last frame.
Plays only when the Dim parameter value is greater than zero.
Plays the media segment forward and holds on the last frame.
Plays only when the Dim parameter value is greater than zero.
Plays the frames of the file in a random order. Plays only when the
Dim parameter value is greater than zero.
Plays the media file forward then reverse, looping continuously.
Plays only when the Dim parameter value is greater than zero.
StudioPix™ Pixelation Luminaire User Manual
Description