Image Transition; Transition Mode; Transition Speed - High End Systems StudioPix Pixelation Luminaire User Manual

CHAPTER 9
Image Graphics Control

Image Transition

In Standard and Extended protocol, you can choose between several Transition Mode options
and use the Transition Speed parameter to adjust the option.

Transition Mode

Transition Default DMX Value: 0 = Normal playback with no transition
Transition Mode controls the pixel transition of a movie file from frame to frame on the image
layer. By default, frames will snap from one to the next, however different frame transitions can
be selected to create unique playback of image files.

Transition Speed

The Transition Speed parameter will adjust the speed of the selected transition mode as the file
changes from frame to frame.
Transition Speed Default DMX Value: 128 (50%) = Normal playback speed
The following table describes the Transition Mode options available and the type of adjustment
you can make to the option using the Transition Speed parameter.
DMX Transition
Value Mode
0 Normal
1 Snap/Fade
2 Fade/Snap
3 Strobe
4 Trails
Note: SHOWPIX and StudioPix fixtures also allow dynamic transitions
between the image layers when adjusting the Global Transition
parameter (see Global Transition on page 47).
64
Description
Normal playback
Snaps from the current frame to the next
frame and then fades out the first frame
Fades out the current frame and then
snaps to the next frame
Flashing crossfade from frame to frame
Retains a partial fade of the current frame
added to the new frame
Transition Speed Function
No effect
Adjusts the duration of the fade
between frames
Adjusts the duration of the fade
between frames
Adjusts the speed of the fade between
frames
Adjusts the amount of decay from the
previous frame
StudioPix™ Pixelation Luminaire User Manual