Chapter 7: Global Control; Global Controls Affect The Composite Image Created When You Define; Dim; Strobe - High End Systems StudioPix Pixelation Luminaire User Manual

Chapter 7
Global Control
Global controls affect the composite image created when you define two
Image layers.
You can use global parameters to adjust intensity, scale and rotation the composite image.
Other parameters apply strobing, dampening and a variety of graphic effects. The ability to
control dynamic transitions between layers also provides additional looks and effects, (see
Chapter 8: Global Control: Transitions on page 49. For global color mixing and color effects
available, see Chapter 6: Color Control on page 35.

Dim

The Dim parameter adjusts the overall LED output from off at a DMX value of 0 to full intensity
at a value of 255 (100%).
Default DMX Value: 0 = LEDs off
Tip: The Dim parameter needs a DMX value greater than 0 for a defined image to be visible.

Strobe

The Strobe parameter affects the combined output of both image settings. You can choose from
the following strobing options:
Strobe Option
Periodic strobe
Random strobe
Random/Synchronous Strobe
Note: An option in each image layer's effect parameter allows the user to strobe a layer
individually, (see Effect Function on page 65).
StudioPix™ Pixelation Luminaire User Manual
Strobes the output at specified intervals from slow to fast.
Strobes the output at random intervals from slow to fast.
Strobes the output at random intervals in unison from slow to
fast.
Description
45