Effect Function; Pixel Mapping - High End Systems StudioPix Pixelation Luminaire User Manual

Effect Function

The Image Effect Function parameter provides effects that can be applied to the media file in
an image layer.
DMX
Name
Value
0 None
1 Strobe
2 Pan and Tilt sync
3 Shake
4 Bar Scan
Target Scan
5
6 Curtain Scan
7 Mirror
Brightness and
8
Contrast
9 Filters
10 Flip

Pixel Mapping

When using Enhanced mode protocol, RGB pixels can be "inserted" in place of an image file
within the graphics engine. This provides the ability to fully utilize the graphic engine features
when pixel mapping the LEDs.
SHOWPIX fixtures have 127 LEDs that can be mapped and StudioPix has 61. To enable the pixel
mapping input, select Folder 255 File 1. The resulting image from the appropriate DMX channels
for the pixel mapping will be routed into the graphics engine and behave the same as internal
content.
Note: The transparent color and several color effects require image files to
function and will not function with pixel mapped input.
StudioPix™ Pixelation Luminaire User Manual
Description
No effects selected
Periodic strobing of the image
Synchronizes image movement with Pan and Tilt
movement
Shakes the current visible image along the x and/or y
axis
Blacks out a portion of the image and creates a visible
"bar" that scans across the LED array
Blacks out a portion of the image and creates a visible
"target" that scans across the LED array
Blacks out a portion of the image and creates a
"curtain" pattern (two parallel bars) that scans across
the LED array
Mirror the visible image on the X and/or Y axis
Adjusts the brightness and/or contrast of the visible
image
Enables the rainbow color effect to flow through the
image in a predetermined order of the LEDs
Flips the visible image on the X and/or Y axis
CHAPTER 9
Image Graphics Control
Adjustments
Modifier 1 Modifier 2
NA NA
Rate Not Used
Rate Size
Horizontal Vertical
Rate Size
Rate Size
Rate Size
Horizontal Vertical
Brightness
Contrast
Selects
Rate
Filter
Horizontal
Vertical
65