How to use the appliance
Turning the power on
How to open
After washing hands
1
Wet hands
Automatic Stop Function
The power lamp flashes and the dryer stops automatically if the appliance is used continually for more than
30 seconds. To continue using the hand dryer, remove your hands, and then re insert them.
Simple heater
Softens the feeling of cold air.
If the room temperature is above 30ºC, the heater will stop working to prevent the temperature from
rising too high.
NOTE
If the room temperature is less than 18ºC, the air may feel cold.
If not using for a long period
Turn the power switch "OFF".
2
Insert hands from the side
All models
JT SB216JSH type only (not applicable to JT SB216KSN)
Power
P o w e
r
switch
O N
O F F
3
Bring hands upwards
Repeat 2 3 times
4
NOTE
Do not turn the power on
while hands or other objects
are inside the hand drying
area.
4