Table of Contents
Advertisement
Troubleshooting
In the case of a trouble such as the impossibility of switching this unit ON, spontaneous
power shutdown or erroneous display, press the Reset button (page 8).
For details, refer to the support information in our website by visiting:
http://www.kenwood.com/
Symptom
Power cannot be switched ON or
pressing a button does not start an
operation.
The remaining battery power drops
soon after recharging.
Audio is not heard.
Battery cannot be recharged.
PC does not recognize this unit.
MGR-E8
Remedy
The hold function is set to "ALL."
Cancel the HOLD function with the HOLD switch on this unit
(page 19).
The battery is nearly exhausted.
Recharge it if it is rechargeable or replace it if it is an alkaline
battery. (page 17)
This unit is being connected to the PC.
This unit is inoperable when it is connected to the PC in the
storage mode.
The rechargeable battery is degraded.
Replace it with a brand-new rechargeable battery.
For the battery replacement, contact your nearest Kenwood
service agent.
Headphones are connected improperly.
Connect headphones correctly to this unit.
USB cable is connected improperly.
Check the connections on both this unit and PC sides.
The ambient temperature is outside the operating temperature
range.
The battery should be recharged within the operating
temperature range. (page 76)
USB cable is defective.
Purchase and use another USB cable.
This unit is connected to the PC improperly.
Check the connection between this unit and PC.
80
Advertisement
Table of Contents
