Setting A-B Repeat - Kenwood MGR-E8 Instruction Manual

3
Set each item
Press [5]/[∞] to select a setting item and press
[£/8].
Press [5]/[∞] to select a setting value and
press [£/8].
The "✓" mark indicates the current setting.
Press [7/BACK] to return to the previous screen page.
4
Exit MENU mode
Press [MENU].

Setting A-B repeat

1
Set the start point (point A)
Press [EDIT] at the point you want to set as the start point of the
repeated section.
2
Select A-B repeat
Press [5]/[∞] to select "A-B repeat" and press [£/8].
3
Set the end point (point B)
Press [EDIT].
To cancel A-B Repeat
Press [EDIT].
Press [5]/[∞] to select "Cancel A-B repeat"
and press [£/8].
The A-B repeat mode is canceled when another file is selected or the fast
forward/fast reverse operation is performed.
A-B Repeat cannot be set if points A and B are too close to each other.
47 English