Inserting/ Removing A Microsd Card - Kenwood MGR-E8 Instruction Manual

Inserting/ removing a microSD card

This unit can play music stored in a microSD card or recording music in a
microSD card.
This unit accepts a microSD or microSDHC memory card. For details, see
<Specifications> (page 76).
Power
1
Press and hold [Power] until the display is turned off
2
Open the card slot cover
3
Inserting/ removing a microSD card
To insert a microSD card
Hold the microSD card so that the terminal pins face upward as
shown in the illustration, and push insert the card straight into the
card slot until it clicks.
To remove a microSD card
Push the microSD card until it clicks and then remove your finger
from the card. The card pops up so that you can pull it out with your
fingers.
4
Close the card slot cover
A microSD or microSDHC card that has been formatted with another device,
including a cell-phone, may be unusable with this unit. Be sure to format the card
in this unit before use. (page 57)
If <DB Auto Update> is set to <Manual Update>, the files in the microSD card
cannot be displayed. In this case, please update the DB. (page 60)
When the microSD card is inserted,
Card slot cover
is displayed on the screen.
23 English