Connecting To The Usb Connector - Kenwood MGR-E8 Instruction Manual

Connecting to the USB connector

1
Connect a USB cable to the USB jack of this unit
For the operating procedure and the playable files, read the instruction manual
for the connected stereo set.
Do not use or leave this unit or connected component in an automobile
compartment with high temperatures. Otherwise, equipment failure may result.
When the temperature of this unit exceeds the operation temperature range,
the protection circuit is activated, which makes recharging impossible. (page 76
<Operational Temperature Range>)
The internal memory and the SD card are recognized as separate drives. If a
drive cannot be selected from USB-compatible stereo component, change the
"Prioritized Drive" setting. (page 60)
When <DB Auto update> is set to <Auto update> (page 60), the USB connection
is canceled and this unit updates the database when the stereo set is switched
off, its input selector is switched or the USB cable is disconnected. If you want
to reconnect the USB cable to the stereo set, wait until the database updating
completes.
USB-compatible
USB cable
stereo
53 English