Connecting Stereo Headphones; Selecting The Ear Tips - Kenwood MGR-E8 Instruction Manual

Connecting stereo headphones

Connect the provided stereo headphones to this unit.
Entanglement-prevention slider
To prevent the headphone cord from being entangled,
slide the entanglement-prevention slider to fix the
headphone bodies in position.

Selecting the ear tips

The headphones are shipped from the factory with the M-size ear tips attached. If the
M-size ear tips do not match your ears, replace them with the provided S-size or L-size ear
tips.
S-size
M-size
L-size
Always hold the headphone bodies when attaching or detaching headphones.
Pulling a cord may result in malfunction.
To clean the ear tips, remove them from the headphone bodies and wash with a
neutral detergent solution. After washing, wipe them dry before use.
The ear tips may deteriorate after a long period of use or storage.
MGR-E8
R
Hold the headphone
body and insert into
each ear.
The optimum condition is when the ear hole
is stopped completely by the ear tip.
22
L