Connecting Stereo Headphones; Hold Function; Inserting/Removing An Sd Card; Inserting The Sd Card - Kenwood MGR-A7-B Instruction Manual

Connecting stereo headphones

Connect the provided stereo headphones to this unit.
Entanglement-prevention slider
• Always hold the headphone bodies when attaching or detaching headphones. Pulling a cord
may result in malfunction.
• To prevent the headphone cord from being entangled, slide the entanglement-prevention
slider to fix the headphone bodies in position.

HOLD function

The HOLD function defeats all of this unit's buttons and helps prevent erroneous
operation when this unit is carried in a bag, etc.
The HOLD function should be canceled before using this unit.
HOLD canceled
HOLD
(Red indication is
visible.)
• When HOLD is on, is displayed on the screen during playback and recording.

Inserting/removing an SD card

This unit can play music stored in an SD card or recording music in an SD card.

Inserting the SD card

1
Switch this unit off.
2
Insert the SD card.

Removing the SD card

1
Switch this unit off.
2
Take out the SD card.
• When the SD card is inserted,
• A special adapter is required to use a miniSD card, miniSDHC card or microSD card.
• The MultiMedia Card (MMC) cannot be used.
12
Press and hold the Power/Menu button until the display is
turned off.
Open the card cover.
Hold the SD card with the label side up and
the notched section on the right, and insert it
into the slot until it clicks.
Close the card cover.
Open the card cover.
Push the SD card until it clicks and then
remove your finger from the card. The card
pops up so that you can pull it out with
your fingers.
Close the card cover.
is displayed on the screen during playback and recording.
English