User Set Mode - Icom IC-F50V Instruction Manual

3
BASIC OPERATION

■ User set mode

If the transceiver has [User Set Mode] assigned to it, you can
"customize" the transceiver operation to suit your preferences and
operating style.
Entering the User Set mode:
q Push and hold [User Set Mode] for 1 sec. to enter the User Set
mode.
w Push [User Set Mode] momentarily to select the appropriate
item.
Then push [CH Up] or [CH Down] to set the desired level/condi-
tion.
• In the User Set mode, the selectable items are preset by your
dealer. The presetable items are Backlight, Beep, SQL Level,
Ringer Level, AF Min level, Mic Gain, VOX Gain*, VOX Delay*,
Battery Voltage, Signal Moni, Vibration and Lone Worker.
* Appear only when the optional headset is connected.
e Push and hold [User Set Mode] for 1 sec. again to exit the User
Set mode.
19