Henny Penny CFA 600 Operator's Manual page 78

5-3. DIAGNOSTIC MODE
DETAILS (Continued)
5-22
The number of Beeped Done Too Long Cycles for this batch of peanut
oil is reported next. Note that this value does not yet include the Cook
Cycles from today.
"D8: BEFORE TODAY "
"D8: 7% OF LOADS"
"D8: BEEPED 'DONE'"
"D8: TOO LONG"
"D8: ON THIS OIL"
(Press the DOWN button...)
Finally, the controller identifies percentage of Beeped Done Too Long
Cycles for the previous batch of peanut oil:
"D8: LAST OIL"
"D8: 6% OF LOADS"
"D8: BEEPED 'DONE"
"D8: TOO LONG"
D 9: Irregular Loading Report
For most Cook Cycles, the controller determines when the product was
placed into the peanut oil. This report identifies the percentage of
cycles for which this determination was not successful.
This drop detection detects most loads, but can fail for several reasons.
Anytime the detection routine fails to find the true drop point, the
controller logs an irregular loading count.
Examples of failed drop detection might be: the Operator takes too long
to load the product to the time he presses the start button, or the
Operator cooks a very light product load, one or two filets, for
example.
In these instances, no drop point will be found and that Cook Cycle
counts as an Irregular Loading Cycle. Only products that have more
than 5% of loads with missed detection's are reported.
Model 500/600
303