Tape; Listening To A Cassette; Selecting The Cassette Playback Mode; Tape Counter - Samsung MM-ZJ9DAB Instruction Manual

Listening to a Cassette

GB
Aays treat your cassettes with care; refer, if
necessary, to the section entitled "Precautions When
Using Audio Cassettes" on page 26.
1
Switch the system on by pressing the (
2
Press the TAPE (
3
Open the cassette deck by pushing on the corner of the cover
marked the PUSH EJECT ( ) button until you hear a click and then
releasing it.
Insert the pre-recorded cassette with the open edge of the tape
facing downwards.
4
Close the deck by pushing on it until it clicks into place.
5
To listen to...
Side A
Side B
Result: The cassette starts playing.
6
To...
Rewind the cassette
Fast-forward the cassette
7
When you have finished playback, press the
1
20
) button.
) button.
Press ...

TAPE (

) button once.
TAPE ( ) button twice.
Press ...
button.
/
/
button.
2,5
6 7 7 6
Selecting the Cassette
Playback Mode
Your micro component system has three cassette playback
modes which enable you to listen to both sides of a cassette
automatically.
Press the REV.MODE button until the appropriate symbol is
displayed.
When the display indicates... The micro component system plays
button.

Tape Counter

When playing a cassette, a counter is displayed to enable you to
take note of the counter value at the start of each track and thus
start playback at the beginning of the track to which you wish to
listen.
The counter is only displayed when a cassette is being played.
Before starting to record a cassette for which you wish to take note
of the counter values at the beginning of each track, reset the
counter by pressing Counter Reset.
back...
One side of the selected cassette and
then stops.
One side of the cassette.
The other side of the cassette and then
stops.
Both sides of the cassette indefinitely until
you press stop.