Programming The Order Of Playback; Checking Or Changing Programmed Tracks - Samsung MM-ZJ9DAB Instruction Manual

5cd changer micro component mp3-cd/cd-r/rw playback
Hide thumbs Also See for MM-ZJ9DAB:
Table of Contents

Advertisement

Programming the Order of Playback

(This function is not available during playback of an MP3-CD.)
GB
You can decide:
The order of the track desired to listen
The track not desired to listen
A maximum of up to 24 order of tracks desired to listen
may be programmed.
Before selecting the track, the CD player should be stopped.
This function may be used simultaneously with the CD
Repeat function.
In the case of the MP3-CD, the PROGRAM/SET button
may be used as the LAST ON, OFF function.
1
If the CD function is selected, stop the player by pressing the
2
Use the DISC button to open the CD tray you want and insert a CD
in the tray.
3
Press this PROGRAM/SET button.
Result: The following indications are displayed:
(01 = Program no., -- -- = Track no. on the disc)
4
Select the required track by pressing:
to move back through the tracks
to move forward through the tracks
5
Press this PROGRAM/SET button to confirm your selection.
Result: The selection is stored and
6
To select other tracks, repeat Steps 4 to 5.
7
Press this MP3-CD/CD ( √/» ) button to listen to the track selection in the
order programmed.
8
To...
Listen to the current track again
Listen to the previous track
Listen to the next track
Skip forwards or backwards
one or more tracks
9
To cancel the selection, press this
Once if the compact disc player is stopped
Result: PROG is no longer displayed.
If you open the compartment, the selection is cancelled.
4
14
is displayed.
Press...
once
twice
once
or
the appropriate
number of times
button.
2,3,5
4
6
1
Checking or Changing Programmed
Tracks
You can check or change your selection of tracks at any time.
1
Press this
2
Press PROGRAM/SET button twice.
Result: The following indications are displayed:
(01 = Program no., – – = Track no. on the disc)
button.
If you have already programmed 24 tracks, CH is displayed
when you press the PROGRAM/SET button.
3
Press this PROGRAM/SET button one or more times until the track
to be changed is displayed.
4
Press the
5
Press this PROGRAM/SET button to confirm your change.
6
Press this MP3-CD/CD ( √/» ) button to start listening to the selection.
Result: The first track selected is played.
button once if you have started listening to the selection.
or
button to select a different track.
2,3,5
4
4
6
1

Advertisement

Table of Contents
loading

Table of Contents