Listening To A Cassette; Selecting The Cassette Playback Mode/Repeat A↔B Function; Tape Counter Function - Samsung MM-X7 Instruction Manual

Listening to a Cassette

Always treat your cassettes with care; refer, if necessary, to the section entitled
"Precautions When Using Audio Cassettes" on page 40.
1 2 Press TAPE on
Switch the system
on by pressing the player to
POWER. select the Tape
function.
P
ress the button
Press the
4 5
or on the remote
button or
control. The cassette
button on the remote
starts playing.
control if necessary
• •
Side A : Tape ( ) button once. Rewind the cassette
• button.
Side B : Tape ( ) button twice.
•
Fast-forward the cassette UP /
button.
29
Press the PUSH
3
EJECT( ) of the
cassette deck to open
the cassette door and
insert a cassette.
•
Insert a cassette with the
recording/playback side facing
the cassette holder, and then
push the cassette door shut.
,
When you have
6
,
finished playback,
press STOP button.
.
/ DOWN
Selecting the cassette Playback
Mode/Repeat A↔B /Tape Counter
Function
Selecting the Cassette Playback Mode
Your micro component system has three cassette playback modes which
enable you to listen to both sides of a cassette automatically. .
Press REVERSE MODE until the appropriate
symbol is displayed.
• One side of the selected cassette and then stops.
:
• One side of the cassette.
:
The other side of the cassette and then stops.
• Both sides of the cassette indefinitely until you
:
press stop.
REPEAT A↔B Function
Press REP. A↔B button.
•
Use this to listen to a specific section again during playback.
•
Set the start and end points of the section you want to repeat 3 times.
•
This is a useful when learning a foreign language.
•
The TAPE REPEAT function can be used only on sections that are longer
than 7 seconds.
Note •
You cannot set the end point (B) within 7 seconds after setting the start point (A).
•
Repeat A-B Function is available for TAPE only.
Tape Counter
When playing a cassette , a counter is displayed to enable you to
take note of the counter value at the start of each track to start
playback at the beginning of the track to which you wish to listen.
•
Before starting to record a cassette for which you wish to take
note of the counter values at the beginning of each track, reset
the counter by pressing and hold COUNTER RESET .
30