Dab Related Functions - Samsung MM-ZJ9DAB Instruction Manual

Storing DAB Stations
You can store up to 6 DAB stations.
Example: Storing the service name "ALPHA1" to the service number 3
1
Press TUNER/BAND to select "DAB".
• Each time you press the button, the mode changes as follows:
FM MW LW DAB.
2
Press / to select the service.
• Press / to change the ensemble.
3
Press PROGRAM/SET button.
• "PRGM" will blink on the display.
4
Press / to select the service number to which the
service will be stored .
• You can select a service number from1 to 6 .
5
Press PROGRAM/SET button .
• "PRGM"disappears from the display and the station will be stored .
• Press the PROGRAM/SET button before "PRGM"disappear from the
display .
6
Repeat steps 2 to 5 to store other stations.
Tuning in to a Stored DAB Station
• Press 1~6 on the remote control to select the stored station .
• If no station is stored when you press 1~6, "NO MEMORY" will
appear on the display.
1
2,4
3,5
2,4
2

DAB Related Functions

Information Display Function
You can check various information about the service being received.
Press INFO.
• Each time you press the button during reception, the mode
changes on the display as follows:
• Depending on the service information , the display may vary or
does not work .
• If no button is pressed for 7~8 seconds, you will be exited from
the Information Display function.
• Small letters and some special characters (Ω, /, =, ?) cannot be
displayed.
To Initialize DAB
• With the DAB function selected, press STOP on the main unit for
longer than 5 seconds.
• "DAB RESET" blinks on the display,then "PUSH TUNE"
flash on the display. and the DAB function will be reset
to the default setting.
• Once you have initialized DAB, you need to press the TUNE button
to search the services again.
DLS (Dynamic Label Segment):
Teletext Display
This function may not work
depending on the service area and
broadcasting circumstances.
Ensemble Label
Frequency
Bit Rate
Program Type (Pop, Classic,
Rock, etc)
17
GB