Tape Deck; Listening To A Cassette; Cd Synchro Record Feature; Recording A Compact Disc - Samsung MAX-6020 Instruction Manual

Listening to a Cassette

Always treat your cassettes with care; refer, if necessary, to
the section entitled "Precautions When Using Audio Cassettes"
on page 21.
1
Switch the system on by pressing the On/Standby button.
2
Select the TAPE function by pressing TAPE on the front panel.
3
Open either cassette deck 1 or 2 by pushing and releasing the deck
cover where PUSH EJECT ( ) is written.
4
Insert the pre-recorded cassette with the open edge of the tape fac-
ing downward.
5
Close the deck by pushing on it until it clicks into place.
Result: Depending on the deck selected, the 1 or 2 indication is
displayed in front of the counter number.
If you insert a cassette in both decks, the system selects the
deck in which you inserted the second cassette.
6
If you have inserted two cassettes, press Deck 1/2 on the front panel
or directly the Deck 1/2 button on the remote control to select the
cassette to be played.
Result: Depending on the deck selected, the TAPE 1 or TAPE 2 indi-
cation is displayed.
7
To listen to... Press ...
Side A TAPE (
Side B TAPE (
Result: The cassette starts playing.
8
When the cassette is stopped, select one of the following functions
as required.
To...
Rewind the cassette
Fast-forward the cassette
On/Standby
R
1
Demo
AI Off Timer Timer
/Sleep On/Off /Clock
TUNER
Band
Mono/ST Memory Repeat
REC/Pause CD SYNC.
REC Lock
8
) DECK 1 and DECK 2
) DECK 2 only
Press ...
2,7
C D TAPE
Program Deck 1/2 REV mode
6
TAPE TAPE REC
Shuffle Normal HI-Speed
Down Tuning Mode Up
8

CD Synchro Record Feature

You can record a compact disc on a cassette in two different ways:
Synchronised recording
Direct recording
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
1
Switch the system on by pressing On/Standby.
2
Insert a blank cassette in Deck 2.
3
Select the CD function by pressing CD on the front panel.
4
Load a compact disc.
5
Select the required disc.
6
Select the required track and press CD SYNC. or press CD SYNC.
directly to start recording at the beginning of the disc.
Result: REC is displayed and recording starts.
7
To stop...
Recording and playing the compact disc
On/Standby
R
1
Demo
AI Off Timer Timer
3
/Sleep On/Off /Clock
TUNER C D
Band
6
Mono/ST Memory Repeat Program
REC/Pause CD SYNC. Shuffle
REC Lock
Down Tuning Mode
Phones

Recording a Compact Disc

The direct recording mode enables you to start recording with
any track on the compact disc.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on the recording.
1
Switch your system on by pressing On/Standby.
2
Insert a blank cassette in Deck 2.
3
Select the CD function by pressing CD on the front panel.
4
Load the compact disc.
5
Select the required disc.
6
Select the required track on the compact disc and press
panel or on the remote control to set the compact disc player to Pause
7
mode.
Press the REC/Pause.
Result: REC flashes.
8
Press the to start playing the track.
Result: The track is recorded on the cassette.
9
When you have finished recording, press
remote control or on the front panel to stop recording.
On/Standby
R
1
Demo
AI Off Timer Timer
3,6,8
/Sleep On/Off /Clock
TUNER C D
Band
Mono/ST Memory Repeat Program
REC/Pause CD SYNC. Shuffle
7
REC Lock
Down Tuning Mode
Phones
Press ...
Volume
+
–
TAPE AUX
Deck 1/2 REV mode
TAPE TAPE REC
Normal HI-Speed
7
Up
on the front
for Deck 2 on the
Volume
+
–
TAPE AUX
Deck 1/2 REV mode
TAPE TAPE REC
Normal HI-Speed
9
Up
15
GB